Locks the security password.
ENABLE/DISABLE: Turns ON or OFF the two way communication and control of the monitor.
Selects whether or not to send an e-mail notiﬁ cation of monitor error via wired LAN.
Resets the following settings within the DISPLAY PROTECTION menu back to factory
setting: POWER SAVE, FAN CONTROL, SCREEN SAVER, SIDE BORDER COLOR, AUTO
Selects the method of input detection the monitor uses when more than two input devices are
The Monitor will not search the other video input ports.
When the current video input signal is not present, then the monitor searches for a video signal
from the other video input port. If the video signal is present in the other port, then the monitor
switches the video source input port to the new found video source automatically.
The monitor will not look for other video signals while the current video source is present.
When the monitor is displaying a signal from the current source and a new secondary source
is supplied to the monitor, the monitor will automatically switch to the new video source. When
current video input signal is not present, the monitor searches for a video signal from the other
video input port. If the video signal is present in the other port, then the monitor switches the
video source input port to the new found video source automatically.
DVD/HD, SCART, VIDEO1, VIDEO2 or S-VIDEO inputs will have priority over DVI, VGA, RGB/HV.
When DVD/HD, SCART, VIDEO1, VIDEO2 or S-VIDEO input signal is present the monitor will
change and keep to the DVD/HD, SCART, VIDEO1, VIDEO2 or S-VIDEO input.
Set the priority of input signals.
When CUSTOM DETECT is selected, monitor searches listed inputs only.
Sets input change speed.
NOTE: When "QUICK" is selected, picture may be distorted when signal input is changed.
This function should be chosen after all adjustment options have been made for the input.
Selects the kind of DVI-D equipment which is connected to the DVI input. Select "DVI-PC" when
PC or other computer equipment is connected. Select "DVI-HD" when DVD player, which has
DVI-D output, is connected.
Selects the type of signal associated with the BNC input.
RGB: Analog input (R, G, B, H, V)
COMPONENT: Component (Y, Cb/Pb, Cr/Pr)
SCART: SCART signal
VIDEO: Composite video (VIDEO2)
S-VIDEO: Separate video
RAW: Disable the expanded feature.
EXPAND: Expand image contrast and increase detail in the dark and bright areas.
Selects the IP (Interlace to Progressive) conversion function.
Note: For DVI input "DVI-HD" needs to be enabled in the DVI mode menu.
Converts interlaced signals to progressive. This is the default setting.
Disables IP conversion. This setting is best suited for motion pictures, but increases the risk of
The selected Color System depends on the video format of the input signal.
VIDEO1, VIDEO2, S-VIDEO inputs only
Automatically chooses Color System setting based on input signal.