NEC V463 Installation Manual

V463 Installation Guide
46" LCD Display
Contents
Product Description and Notes
Tilt Angle and Rotation
Ventilation Recommendations
Display Dimensions
Front, Top, Right, Left, Bottom
Rear
With stand
Table Top Stand Dimensions
Optional Speaker Dimensions
Optional Wall Mount Dimensions (WMK-3257)
Input Panel, Control Codes

Product Description

Type:
Resolution:
Aspect Ratio:
FCC:
Power Consumption:
BTU's:
NOTES:

This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.

Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.

4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see "Aspect Modes" in menus and user manual).

Distances are in inches, for millimeters multiply by 25.4.

Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in either landscape or portrait orientation.
www.necdisplay.com
LCD Display
1920 x 1080
16:9
Class B
76W (typ)
259.32 BTU/hour
CLOCKWISE ROTATION ONLY
NEC Display Solutions of America, Inc.
Page 1
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Screen Surface:
Dimensions without stand: 41.7"(W) x 24.1"(H) x 2.6"(D)
Dimensions with stand:
Weight without stand:
Weight with stand:
MAXIMUM TILT ANGLE
V463
Rev 1.0
Anti-Reflective
41.7"(W) x 25.6"(H) x 9.4"(D)
41.7 lbs
44.5 lbs
Page 1 of 9