Download  Print this page

Advertisement

Snowy Picture, Poor Sound in TV
Check antenna/cable connection. Use new cable if
necessary.
Interference in TV
Check components for shielding, move away from
monitor if necessary.
RS-232C or LAN control is not available
Check RS-232C or LAN cable connection.
Check "CONTROL" setting in "EXTERNAL CONTROL".
Check the "ID=ALL REPLY" setting in "EXTERNAL
CONTROL".
The touch panel does not respond
Make sure that PIP mode is not selected.
Check the input signal setting.
Make sure that STANDBY setting in TOUCH PANEL in
ADVANCED OPTION is "ON".
Make sure that PC SOURCE setting in TOUCH PANEL in
ADVANCED OPTION is "AUTO".
Using slot 2 type PC: Make sure the slot 2 type PC is
connected properly.
Using external computer: Make sure the USB cable is
connected properly.
The response of the touch screen is not correct
Avoid direct sunlight or strong light on the screen.
If there are some obstacles near the TOUCH screen, it
may malfunction.
Refl ective bar and camera module may be dusty or dirty
(see page 17 Figure 1), wipe gently with a soft cloth.
Either light vertical or horizontal stripes may appear, depending on the specifi c display pattern. This is no product fault or degradation.
English-40

Advertisement

Table of Contents

   Also See for NEC MultiSync V652-TM

   Related Manuals for NEC MultiSync V652-TM

This manual is also suitable for:

V423-avtV463V463-avtMultisync v423

Comments to this Manuals

Symbols: 0
Latest comments: