Mounting; Orientation; Rigging - Chauvet Cosmos LED User Manual

Mounting

Orientation

Rigging

Carrying
Handle
3. Setup
The Cosmos™ LED may be mounted in any safe position provided there is adequate room for
ventilation.
Be sure that the structure can support the weight of the fixture. Please see the "Technical
Specifications" section of this manual for a detailed weight listing. Mount the fixture securely. This
may be done with a screw, nut, and bolt, or a hanging clamp. The hole in each bracket is 13 mm
in size. When rigging, consider routine maintenance and control panel access. Please see the
following steps for installation.

You may set this on a surface, using the four rubber feet. Or, you may install the
mounting bracket and mount this product.

If the power link out is intended to be used with multiple fixtures, take into account the
length of each power cable, and mount the fixtures close enough to one another.

Always use safety cables.

Never grab this fixture by the balls! Always use the carrying handle when moving this
fixture.
7
Rubber feet
(4x)
Mounting
Bracket
9/10/2010 3:56 PM