Kickback And Related Warnings - Bosch AG40-85 Operating/Safety Instructions Manual

direct guard opening or particles toward
your body.
A type 27 guard must be used with all
grinding wheels, bonded body sanding flap
discs, wire brushes and wheels.
Do not place excessive or sudden pressure
on the wheel while grinding.
Do not use accessories that run
eccentrically.
Do not use type 1 abrasive wheels designed
for straight/die grinding.
Do not use type 1 cutting wheels for face
grinding.
Do not use Type 11 abrasive (cup) wheels
with this tool.

Kickback and Related Warnings:

Maintain a firm grip on the power tool and
position your body and arm to allow you to
resist kickback forces. Always use auxiliary
handle, if provided, for maximum control
over kickback or torque reaction during
start-up.
Never place your hand near the rotating
accessory.
Do not position your body in the area where
power tool will move if kickback occurs.
Use special care when working corners,
sharp edges etc. Avoid bouncing and
snagging the accessory.
Do not attach a saw chain woodcarving
blade or toothed saw blade.
Do not use the switch "Lock-ON" feature in
situations where kickback is likely, such as
when working into a corner.
Safety Warnings Specific for Grinding and
Abrasive Cutting-Off Operations:
Use only wheel
recommended for your power tool and the
specific guard designed for the
wheel.
The guard must be securely attached to the
power tool and positioned for maximum
safety, so the least amount of wheel is
exposed towards the operator.
Wheels must
recommended applications. For example:
do not grind with the side of cut-off wheel.
Always use undamaged wheel flanges that
are of correct size and shape for your
selected wheel.
Do not use worn down wheels from larger
power tools.
types that
selected
be used only
are
for