GCL-H
STANDARD-DUTY HOIST OPERATOR
The GCL-H is designed for high or full-lift sectional
and rolling doors that have a 30-cycle/hour or
less duty requirement. Advanced features and
robust mechanical design combine to provide a
standard-duty operator that sets a new standard for
productivity.
UL325-2010 APPROVED
• Allows for monitored entrapment protection and
momentary operation when used with select photo eyes
and/or edge-sensing devices.
• See back for approved list of monitored devices.
GCL-H Advantages
• MultiVolt
- Order phase specific operator for the job and
™
have the ability to select the right voltage on the job site.
- Single Phase: 115/208/230 VAC
- Three Phase: 208/230/460 VAC
- 575VAC voltage models available separately
• Modular design with optional expansion boards for
advanced timer to close, and auxiliary output functionality.
• LCD display with intuitive setup menu. Provides real-time
status and trouble-shooting assistance.
• Internal receiver with the ability to individually add/delete
up to 50 Intellicode
I transmitters directly from the LCD
®
display.
• EZ Limit
™
provides for push to set limits that remain
synchronized with door even during long term loss
of power.
• TensiBelt
primary drive reduction eliminates need to
™
adjust belt tension.
• Open/close/stop and setup keys included on control board.
Keeps all controls near the LCD display used convenient
for set up.
www.GenieCompany.com/commercial
GCL-H operators are covered by the following U.S. patents: 6737823, 7878931, 8014966, 8113263
GENIE
CommErCIAL opErATors
®
Standard Features
• EZ Limit
™
electro-mechanical limits.
• MultiVolt
voltage simplification.
™
• Max run timer automatically adjusts to up and down run time.
• TensiBelt
primary reduction.
™
• Delay on reverse.
• 16-character LCD display.
• UL325-2010 approved.
• Advanced radio receiver displays and stores activation by transmitter
ID number on the LCD screen.
• 3-button control station.
• 2-year/20,000-cycle warranty.
• Programmable mid-stop.
• Emergency hoist for manual operation; available in right or left hand.
|
800.843.4084
Need help?
Do you have a question about the GCL-H and is the answer not in the manual?
Questions and answers