Caution: Replace the tesa tape if it is torn.
Step 4 Release the 2 tabs at each side of the Front Panel
Assembly in the direction of arrow.
Step 5 Release the 3 tabs at the bottom chassis.
Caution: Do not exert strong force when releasing the tabs.
Step 6 Remove Front Panel Assembly.
Caution: During assembling, ensure that 5P wire is
dressed between bottom chassis and front panel properly
according to diagram shown.
8.15. Disassembly of FL P.C.B.
• Follow (Step 1) to (Step 6) of Item 8.3.
• Follow (Step 1) to (Step 6) of Item 8.14.
Step 1 Remove 3 screws.
Step 2 Remove 1 screw.
55