Disassembly Of Dvd Module P.c.b - Panasonic SCXH70 Service Manual

Caution: During assembling, ensure that DVD Mechanism
Unit (DLS6E) is properly located and fully seated on bot-
tom chassis before screwing.
Caution: Ensure that two guiding pins of DVD Mechanism
Unit (DLS6E) are fully inserted into the two slots of Front
Panel Assembly.
8.8. Disassembly of DVD Module
P.C.B.
• Follow (Step 1) to (Step 6) of Item 8.3.
• Follow (Step 1) to (Step 3) of Item 8.4.
• Follow (Step 1) to (Step 6) of Item 8.7.
Step 1 Remove 2 screws on DVD Module P.C.B..
Step 2 Detach 50P FFC at the connector (FP8101) on DVD
Module P.C.B..
Step 3 Detach 5P wire at the connector (FP9001) on DVD
Module P.C.B..
Step 4 Remove 2 screws.
Step 5 Remove 1 screw.
Step 6 Release the tab of the side of the Rear Panel in the
direction of arrow.
47