Disassembly Of Front Panel Assembly - Panasonic SCXH70 Service Manual

Caution: Ensure that the pins of Digital Amplifier IC (IC403)
is positioned correctly on Main/D-Amp P.C.B..
Step 2 Put Main/D-Amp P.C.B. on to Amp Heatsink.
Caution: Ensure that Main/D-Amp P.C.B. is properly
located and fixed on to Amp Heatsink before screwing.
Caution: During assembling, replace the IC insulator if it is
broken.
Step 3 Screw the 3 screws on the side A of Main/D-Amp
P.C.B..
Note: For assembling of Digital Amplifier IC (IC404/IC405),
repeat the (Step 1).
8.14. Disassembly of Front Panel
Assembly
• Follow (Step 1) to (Step 6) of Item 8.3.
• Follow (Step 1) to (Step 6) of Item 8.7.
Step 1 Detach 17P FFC at the connector (CN203) on Main/D-
Amp P.C.B..
Step 2 Detach 5P wire at the connector (FP9001) on DVD
Module P.C.B..
Step 3 Lift up tesa tape to release 5P wire.
54