Step 3 Lift up FL P.C.B..
Step 4 Remove Ground Spring.
Caution: Keep the Ground Spring in safe place, place it
back during assembling.
Step 5 Desolder 3P Cable at the cable holder (H902) on FL
P.C.B..
Step 6 Desolder 3P Cable at the cable holder (H904) on FL
P.C.B..
Step 7 Remove FL P.C.B..
Caution: During assembling, ensure that FL P.C.B. is prop-
erly located and fully fixed onto front panel.
Caution: During assembling, ensure that 5P wire is
dressed properly according to diagram shown.
8.16. Disassembly of Volume Button
P.C.B.
• Follow (Step 1) to (Step 6) of Item 8.3.
• Follow (Step 1) to (Step 6) of Item 8.14.
Step 1 Remove 2 screws.
Step 2 Lift up Volume Button P.C.B..
56