Maytag W10550277A Use & Care Manual page 10

8, Select cycle
Turn cycle knob to choose your
wash cycle. Estimated Time
Remaining will light up with a
cycle time. You may notice time
adjusting during the cycle. This is
normal.
estimated time remaining
delay 4.
start
fill wash rinse spin done
9. Select cycle modifiers
modifiers
II cold II cool [] warm i hot
auto temperaturecontrol
Iii no Iit tow [] medium [] max
spin extract
[] light I!1medium [] heavy
[]extra
heavy
Once you select a cycle, the default settings for that cycle will be
lit. Press the Modifier buttons to change the Wash Temp, Spin
Speed, and Soil Level, if desired. Not all settings are available with
all cycles.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
Wash Temp Suggested Fabrics
Hot
Some cold water is added to save Whites and pastels
energy, This may be cooler than your Durable garments
hot water heater setting, Heavy soils
Wa rm
Some cold water will be added, so Bright colors
this may be cooler than what your Moderate to light soils
previous washer provided,
Cool
Warm water is added to assist in Colors that bleed or fade
soil removal and to help dissolve Light soils
detergents
Cold
Warm water may be added to assist Dark colors that
in soil removal and to help dissolve bleed or fade
detergents Light soils
1 O, Select cycle options
options
i <<<<<<<< I _i+,
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain options
such as Extra Rinse. These may be turned off, if desired.
NOTE: Not all options are available with all cycles.
1 1, Press START/PAUSE to begin
cycle
start
pause
Press the START/PAUSE button to start the wash cycle. When the
cycle has finished, the end of cycle signal will sound (if set). Promptly
remove garments when cycle is done to avoid odor, reduce wrinkling,
and rusting of metal hooks, zippers, and snaps.
If lid is left open for more than 10 minutes, the water will pump out.
10