Installing The Appliance; Before You Begin - Miele F 1471 Vi Operating And Installation Manual

Installing the appliance

Before you begin

Read these instructions completely
and carefully.
Have the appliance installed by a
qualified technician, according to
the enclosed installation instructions.
To reduce the risk of injury or
damage to the product, two people
should be used for installation.
These installation instructions are
intended for use by qualified installers.
In addition to these instructions, the
appliance must be installed in
accordance with all local codes, or in
the absence of a local code.
– In the USA, in accordance with the
National Electric Code,
ANSI/NFPA 70 - latest edition/State
and Municipal codes and/or local
codes.
– In Canada, in accordance with the
Canadian Electric code C22.1 - latest
edition/Provincial and Municipal
codes and/or local codes.
58
Tools needed for installation
– Cutter with adjustable blade
– Cordless screwdriver T 20
– Torx screwdriver T 20
– Hammer drill for drilling holes in wall
or floor
– Wood drills in different sizes
– Hammer
– Open end wrench ½" (SW 13 mm)
– Box-end wrench
– 5/16" (8 mm) hex nut driver
– Adhesive tape
– Multi-grip pliers
– Level
– Metal tape measure
– Square
Other
– Stepladder
– Dolly, hand truck
– Wooden beam
(cross section min. 29 ½" x 39
[75 cm x 100 cm] as an alternative tilt
protection, length depends on the
width of the installation cavity)
– Wood screws in different sizes
Optional Tool
– "Merging Kit" for side-by-side
installation.
– Front panel gap kit
3
/ "
8