Signing Off The Hob - Miele KM 6314 Operating And Installation Manual

Signing off the hob

If you want to sign off from the Miele{home system, first
prepare the signing off procedure on the master appliance
(see the "Miele|home" fitting and installation instructions).
^ With the hob switched off, touch the s and $ sensors at
the same time until the safety lock indicator lamp flashes.
After the programming mode has been called up, P
(Programme) and S (Status) will appear in the timer display.
On hobs with 3 cooking zones, an additional indicator will
appear at the rear left.
^ Touch the sensor for selecting the front left cooking zone
and then touch the 1 on the numerical keypad (Set
Programme 10).
^ Touch the sensor for selecting the front right cooking zone
and then touch the 1 on the numerical keypad (Set Status 1
= Signed off).
The signing-off process starts, and the number 1 flashes. The
signing off process will take a few minutes. The number 1 will
light up constantly when the process has been completely
successfully.
^ To save the setting, touch the s sensor until all the
displays go out.
^ Proceed as described in the "Miele|home" or Con|ctivity
fitting and installation instructions.
Con|ctivity and Miele|home
57