Con|Ctivity And Miele|Home; Signing On The Hob - Miele KM 6322 Operating And Installation Instruction

Con|ctivity and Miele|home

Signing on the hob

58
If you want to sign the hob
– on to the Miele{home system, first prepare the signing on
procedure on the master appliance (see the "Miele|home"
fitting and installation instructions)
– on to the Con|ctivity system, first sign on the cooker
hood (see the "Con|ctivity" fitting and installation
instructions).
^ With the hob switched off, touch the s and $ sensors at
the same time until the safety lock indicator light flashes.
After selecting programming mode, P (Programme) and S
(Status) will appear in the timer display. On hobs with 3
cooking zones, an additional indicator will appear at the rear
left.
^ Touch the sensor for selecting the front left cooking zone
and then touch the 1 on the numerical keypad (Set
Programme 10).
^ Touch the sensor for selecting the front right cooking zone
and then touch the 2 on the numerical keypad (Set Status 2
= Signed on).
The signing-on process starts, and the number 2 flashes. The
signing on process will take a few minutes. The number 2 will
light up constantly when the process has been completely
successfully.
^ To save the setting, touch the s sensor until all the
displays go out.
^ Proceed as described in the "Miele|home" or Con|ctivity
fitting and installation instructions.