Miele H 5030 BM Operating And Installation Manual page 7

~
Before connecting the appliance,
make sure that the connection data on
the data plate (voltage and rated load)
match the mains electricity supply. This
data must correspond in order to avoid
the risk of damage to the appliance.
Consult a qualified electrician if in
doubt.
~
Do not connect the appliance to the
mains electricity supply via a multi-
socket unit or an extension lead. These
do not guarantee the required safety of
the appliance (e.g. danger of
overheating).
~
For safety reasons, this appliance
may only be used when it has been
fully installed.
~
Never open the housing of the
appliance.
Tampering with electrical connections
or components and mechanical parts is
highly dangerous to the user and can
cause operational faults.
~
While the appliance is under
warranty, repairs should only be
undertaken by a service technician
authorised by the manufacturer.
Otherwise the warranty will be
invalidated.
Warning and Safety instructions
~
During installation, maintenance and
repair work, the appliance must be
disconnected from the mains electricity
supply. It is only completely isolated
from the electricity supply when:
– the mains fuse is disconnected,
– the screw-out fuse is removed (in
countries where this is applicable),
– or it has been switched off at the
isolator or at the wall socket and the
plug has been withdrawn.
~
Faulty components must only be
replaced by genuine Miele original
spare parts. The manufacturer can only
guarantee the safety of the appliance
when Miele replacement parts are
used.
~
If the connection cable is damaged,
it must be replaced by a Miele
approved service technician.
~
This microwave compact oven must
not be installed and operated in mobile
installations (e.g. on a ship).
7