Problem Solving Guide - Miele H 5030 BM Operating And Installation Manual

With the aid of the following guide, minor problems can be easily corrected
without contacting Miele.
If you then can't remedy the problem yourself, please call Miele (see back cover
for details). Please note that a call-out charge will be applied for unnecessary ser-
vice visits where the problem could have been rectified as described in these
operating instructions.
,
On no account open the appliance housing!
Installation, maintenance and repairs may only be carried out by a suitably
qualified and competent person in strict accordance with current national and
local safety regulations.
Repairs and other work by unqualified persons could be dangerous. The
manufacturer cannot be held liable for unauthorised work. Ensure current is not
supplied until after maintenance or repair work has been carried out.
Problem
The display is dark.
A programme will not
start.
If the door is opened
whilst the oven is
operating on microwave
solo, the oven will stop
making a noise.
Possible cause and remedy
– Check whether the time display is set so that it does
not appear in the display (see "Settings
– Check that the appliance is plugged into the mains
supply and switched on at the socket.
– Check whether the mains fuse has tripped. If it has,
contact a qualified electrician or Miele.
– Check that, if using a programme with microwave,
the door is shut properly.
– Check that a power level and duration have been
entered if operating in microwave mode .
– Check that, if operating with a combination
programme, the following have been entered: a
power level, a duration for the microwave mode and
a temperature for the conventional oven operating
mode.
This is because the cooling fan switches off when the
door is opened.
It does not indicate a fault.

Problem solving guide

– P i").
67