Projecting A Waypoint - Garmin 101 Owner's Manual

Main Menu Pages
Waypoints Menu Page
Waypoint Options
Project Waypoint Page
Edit Number Page
26

Projecting a Waypoint

Using the Project waypoint feature, the Foretrex 101 can create a waypoint at a specified
distance and bearing using an existing waypoint as a reference. You can also change the
waypoint name, symbol, and elevation on this page.
To project a waypoint:
1. Select a waypoint from the list on the Waypoints List Page and press the
to display the Review Waypoint Page.
2. Use the UP or DOWN button to highlight 'OPTIONS' and press
3. Use the or button to highlight 'PROJECT' and press
UP DOWN
Project Waypoint Page, which shows the numeric name assigned to the new waypoint
and with the distance field highlighted.
3. Press the ENTER button to display the Edit Number Page. Select the digit you wish to
change and press the ENTER
5. Press the UP or DOWN
button. When all numbers are entered correctly, highlight 'OK' and press the
button.
6. Use the button to highlight the bearing field and press the
DOWN
display the Edit Angle Page. Use the same method to enter an angle.
The name, symbol, and elevation can be changed on this page as well.
7. When all changes have been made, highlight 'OK' and press the
the waypoint.
8. Highlight 'GOTO' and press the
waypoint.
button to display the drop-down number list.
button to highlight the correct number and press the
ENTER button to begin direct navigation to the
ENTER button
ENTER .
to display the
ENTER
ENTER
ENTER
button to
ENTER
ENTER button to save