Adjusting The Backlighting And Contrast - Garmin 101 Owner's Manual

Adjusting the Backlighting and Contrast

If the lighting conditions make it hard for you to see the screen, adjust the contrast or
turn on the backlight. You may also make these adjustments through the Main Menu Page.
Refer to the "Setup Menu: Set Display" section for more information.
To use the backlight:
1. Press and release the POWER
2. The backlight is timed to stay on for 30 seconds. Press the
wish to turn the backlight off before the automatic light timeout.
To adjust the backlight timeout from the Satellite Page:
1. Press the PAGE button until you see the Satellite Page.
2. Press to display the Satellite Page Options.
ENTER
3. Press UP/DOWN to highlight 'SETUP DISPLAY' from the options menu. Press
3. Press UP/DOWN to highlight the line below 'LIGHT TIMEOUT'. Press
4. Press UP/DOWN to highlight the desired duration for the backlight to remain on before
it automatically turns off. Press
To adjust the screen contrast from the Satellite Page:
1. Press the PAGE button until you see the Satellite Page.
2. Press to display the Satellite Page Options.
ENTER
3. Press UP/DOWN to highlight 'SETUP DISPLAY' from the options menu. Press
Use the UP/DOWN buttons to highlight the line below 'CONTRAST'. Press
Or Press UP/DOWN on the Satellite Page to automatically bring up the contrast slider.
4. Press the button to make the screen darker or the
UP
button from any screen to turn on the backlight.
POWER
ENTER to select the desired time limit.
button to make it lighter.
DOWN
button again if you
ENTER .
ENTER .
ENTER .
ENTER .
Main Pages
Satellite Page
Satellite Page Options
Display Setup
9