Tracks Menu Page; Using The Tracks Menu Page - Garmin 101 Owner's Manual

Using the Tracks Menu Page

The Foretrex 101 draws an electronic breadcrumb trail or 'track log' on the Map Page as
you travel. The Track Log contains information about points along its path, including time,
and position. The Foretrex 101 uses this information to allow you to navigate using the
saved track.
The track log starts recording as soon as the Foretrex 101 gets a location fix. For the
best results, clear the track log before you start traveling because when the track log is full,
the new track points overwrite the oldest track points. The percentage of memory used
by the current track log displays at the top of the page. After the Track Log is 'Cleared', it
displays zero percent. When the display reaches 100%, the most recent track points start
to overwrite the least recent track points (if 'WRAP WHEN FULL' is 'YES'). To avoid losing
track points, save the Track Log when it approaches the 99% mark.
To open the Tracks Menu Page:
1. Press the PAGE button to access the Main Menu.
2. Use the and
UP DOWN

Tracks Menu Page.

To clear the Track Log from the Tracks Menu Page:
1. Press the button to access the Main Menu. Press the
PAGE
'TRACKS' is highlighted to open the Tracks Menu Page.
2. Highlight 'CLEAR TRACK' and press
'YES' on the pop-up window and press
arrows to highlight 'TRACKS' and press
. Use the
ENTER UP
to clear the track log.
ENTER
to open the
ENTER
button when
ENTER
and arrows to highlight
DOWN
Main Menu Pages
Tracks Menu Page
Main Menu Page
Tracks Menu Page
Clearing the Track Log
29