Expired And Interval Timer Tones - Garmin 101 Owner's Manual

To set the expired action:
1. Press the PAGE button until the Main Menu Page is displayed.
2. Use the UP and DOWN
3. Use the and
UP DOWN
4. Use the UP and DOWN
5. Use the UP and DOWN
stop after it reaches 0:00. Select 'COUNT UP' and press
counting up when it reaches 0:00.

Expired and Interval Timer Tones

You can set the expired and interval tones to different tones. The interval tone sounds at
each minute and then during the last 10 seconds.
To set the Expired and Interval Tones:
1. Press the PAGE button until the Main Menu Page is displayed.
2. Use the and
UP DOWN
3. Use the and
UP DOWN
4. Use the UP and DOWN
'INTERVAL TONE' and press
5. Use the UP and DOWN
ENTER .
The selected Expired Tone will sound at the expiration of the timer. The selected Inter-
val Tone will sound at minute intervals and during the final ten seconds of the timer.
buttons to highlight 'SETUP' and press
buttons to highlight 'SET TIMER' and press
buttons to highlight the field below 'STOP' and press
buttons to highlight 'STOP' and press
buttons to highlight 'SETUP' and press
buttons to highlight 'SET TIMER' and press
buttons to highlight the field below 'EXPIRED TONE' or
ENTER.
buttons to highlight the desired tone from the list. Press
ENTER .
ENTER.
ENTER.
ENTER to have the timer
ENTER to have the timer start
.
ENTER
ENTER.
Main Menu Pages
Setup Menu: Set Timer
Setting the expired action
Set Timer Page
scrolled to bottom
Selecting the Interval Tone
43