Verifying Settings - ZyXEL Communications AMG1202-T10A User Manual

Appendix A Setting up Your Computer's IP Address
Click the Gateway tab.
4
• If you do not know your gateway's IP address, remove previously installed gateways.
• If you have a gateway IP address, type it in the New gateway field and click Add.
Click OK to save and close the TCP/IP Properties window.
5
Click OK to close the Network window. Insert the Windows CD if prompted.
6
Turn on your ZyXEL Device and restart your computer when prompted.
7

Verifying Settings

Click Start and then Run.
1
In the Run window, type "winipcfg" and then click OK to open the IP Configuration window.
2
Select your network adapter. You should see your computer's IP address, subnet mask and default
3
gateway.
Windows 2000/NT/XP
The following example figures use the default Windows XP GUI theme.
Click start (Start in Windows 2000/NT), Settings, Control Panel.
1
Figure 116 Windows XP: Start Menu
228
AMG1202-T10A User's Guide