Yealink SIP-T22P User Manual page 76

User Guide SIP-T22P IP Phone
To place the call on public hold:
1. Press the shared line key or the Hold soft key when there is an active call on the
shared line.
To pick up the call placed on public hold:
1. Press the shared line key on any phone when there is a public held call on the
shared line.
The shared line key LED illuminates flashing when the shared line call is placed on
public hold. For more Shared Line key LED indications, refer to
5.
To place the call on private hold, you should configure a private hold key in advance:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press
4. Press
field.
5. Press the Save soft key to accept the change.
You can also configure a private hold key via web user interface at the path
Phone->DSS Keys.
To place the call on private hold:
1. Press the private hold key when there is an active call on the shared line.
Note The private held call can be only retrieved by the hold party.
If the call is placed on private hold, and you attempt to pick up the call by pressing the
shared line key, the retrieve will fail and the LCD screen will prompt "Forbidden".
To barge in a shared line call:
1. Press the shared line key on any other phone when there is an active call on the
shared line.
For more shared line key LED indications, refer to
66
or , or the Switch soft key to select Key Event from the Type field.
or , or the Switch soft key to select Private Hold from the Key Type
LED Instructions
LED Instructions on page 5.
on page