Engine Stop Button; Choke Knob For Pull Type; Manual Starter Handle; Steering Friction Adjuster - Yamaha 8 Owner's Manual

Hide thumbs Also See for 8:
Table of Contents

Advertisement

Components
1
2
3
1. Clip
2. Cord
3. Engine shut-off switch
EMU26001

Engine stop button

To open the ignition circuit and stop the en-
gine, push this button.
EMU26011

Choke knob for pull type

To supply the engine with the rich fuel mix-
ture required to start, pull out this knob.
21
EMU26070

Manual starter handle

To start the engine, first gently pull the han-
dle out until resistance is felt. From that posi-
tion, then pull the handle straight out quickly
to crank the engine.
ZMU02851
EMU26122

Steering friction adjuster

A friction device provides adjustable resis-
tance to the steering mechanism, and can be
set according to operator preference. An ad-
justing screw or bolt is located on the swivel
bracket.
ZMU02852
To increase resistance, turn the adjuster
clockwise.
To decrease resistance, turn the adjuster
counterclockwise.
EWM00040
Do not overtighten the friction adjuster. If
there is too much resistance, it could be
ZMU02860
WARNING
ZMU04508

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents