Windsor Admiral ADM8IA Operator Instructions Manual page 9

Adjust handle to comfortable
operating position. Tip machine
back by main handle to move to
starting point.
Lower machine to floor.
Select continuous setting to start
solution spray or select intermittent
setting to enable use of trigger
switches to start solution spray.
The intermittent setting requires the
operator to hold any one of the
three trigger switches in the "on"
position with the fingers, and is
typically used in small areas where
short cleaning passes are made.
The continuous setting allows the
operator to set the switch in the "on"
position with one touch, and is
typically used in large areas where
long cleaning passes are made.
STEP
5
STEP
6
STEP
7
ADMIRAL 86038270 05/22/07
OPERATIONS
INT
CONT
8