Filling Operations - Windsor Admiral ADM8IA Operator Instructions Manual

RECOVERY TANK
FILLING THE ADMIRAL
NOTE: Use clean bucket of water to fill solution tank
Do not put defoamer, solvents, spotter or
prespray chemicals in the solution tank.
Do not allow water to spill into vacuum motor inlet. Dry
spillage from top of solution tank before replacing
recovery tank.
CHEMICALS
Suitable Chemicals
Alkalis
Detergents
Hydroxides
Soaps
Vinegar
* Product Trademark Names
SOLUTION
TANK
FILL LINE
Non-Compatible Chemicals
Aldehydes
Aromatic Hydrocarbons
SP Butyls
Carbon Tetrachloride
Clorox*
Chlorinated Bleaches
Chlorinated Hydrocarbons
Lysol*
Methyl Ethel Ketone (MEK)
Perchorethylene (perc)
Phenolics
Trichlorethylene
D-Limonene
ADMIRAL 86038270 05/22/07
STEP
1
STEP
2
STEP
3
STEP
4

FILLING OPERATIONS

Remove recovery
tank
Add water
8 gal.
or
(30.3 ltr.)
140°F (60°C)
8 – 16oz.
(237ml – 473ml)
Add cleaning
chemical
Replace recovery
tank
6