Windsor Admiral ADM8IA Operator Instructions Manual page 18

MAINTENANCE
SOLUTION PUMP REPLACEMENT
1. Turn off all switches and unplug the machine.
2. Remove recovery tank.
3. Remove the (2) screws that fasten the solution tank to the frame, and tilt tank back to expose the inside of the
frame.
4. Remove solution hoses from fittings in pump.
5. Remove the (2) screws that fasten the pump to the frame.
6.
Reverse process to install pump.
Pressure Switch
PumpHead
86161980
86251040
PRV NO. 42-809332
PRV NO. 65187
Pump Head
86251090
PRV NO. 65204
ONLY QUALIFIED MAINTENANCE PERSONNEL ARE TO PERFORM THE FOLLOWING REPAIRS.
!
WARNING:
1. Turn off all switches and unplug machine.
2. Remove recovery tank and brush.
3. Remove the (2) screws that fasten the solution tank
to the frame, and tilt tank back to expose the inside
of the frame.
4. Loosen the (4) screws that hold the brush motor in
place and slide motor forward to release tension in
belt.
5.
Remove the (2) screws that fasten the vacuum shoe
links (p/n 86227350 – PRV NO. 05016) to the brush
housing.
17
Pump Replacement Parts for Shurflo 100 psi (86026400 – PRV NO. 65254)
Pump Replacement Parts for Flojet 100 PSI 230V (86004770 – PRV NO. 47477)
Valve Asm
86258860
PRV NO. 84166
BELT REPLACEMENT
ADMIRAL 86038270 05/22/07
Valve Asm
86258830
PRV NO. 84161
Diaphragm
86235120
PRV NO. 29219
6. Remove the (3) screws that fasten
the side plate (p/n 86249420 – PRV
NO. 62759) to the brush housing to
remove belt.
NOTE: All components associated with
driving the brush will come out with the
side plate.
7.
Reverse process to install belt.
Diaphragm
86003400
PRV NO. 29206
Motor
86247370 - PRV NO. 53246
86249420
PRV NO. 62759
86227350
PRV NO. 05016