Windsor SCC172 Instructions Manual page 24

PROBLEM
Little or no solution flow to the floor
No power to machine
Little or no propel
CAUSE
Solution tank empty
Solution flow turned off or set
too low
Solution strainer plugged
Solution hoses obstructed
Solution solenoid valve
obstructed or stuck
Battery disconnected
Emergency shut-off activated
Battery connections corroded
Faulty main contactor
Faulty power switch
Low battery charge
Machine turned on with
directional control button(s)
not in neutral
Controller overheated
Loose connection
86221970 17" SCRUBBER 01/03/07
TROUBLESHOOTING
SOLUTION
Fill solution tank
Turn on or increase flow
setting
Clean solution strainer
Clear obstruction from hose
Clean or replace
Check all battery cable
connections
Reset
Clean connections
Replace contactor
Replace switch
Charge batteries
Allow control button to return
to neutral. Restart
Allow cool down period
Check motor wires and
connection
4-9