Intel Ether express PRO/100+ TX PCI model B Installation Manual page 23

4. Click OK when prompted. You'll see the Adapter Teaming
Configuration window.
Follow the instructions to assign adapters to a team. ALB supports up
5.
to two adapter teams, with two, three, or four adapters per team.
6. Select Load Balancing in the Team Function area.
7. Click OK and then click Close to finish. When prompted, restart your
computer.
Deleting a Team
Double-click the Network icon in the Control Panel.
1.
2. On the Adapters tab, select the ALB team to delete.
3. Click Remove. A confirmation dialog appears. Click Yes.
Click Close. Restart when prompted.
4.
Setting up ALB in NetWare
Copy the following lines from the EXAMPLES.TXT file (on the
1.
Configuration and Drivers disk) and paste them into the appropriate
files. These commands assume the AFT.NLM and E100B.LAN files
are in the system directory of your workstation. (Files must be copied
from the Configuration and Drivers disk to your workstation's hard
drive).
Copy this line into the STARTUP.NCF file
;- Load Adaptive Load Balancing
load aft
Deleting a Team
Setting up ALB in NetWare
Adaptive Load Balancing
must be loaded before the
PRO/100+ adapter driver,
E100B.LAN, or any other
LAN driver.
Choose Ethernet Controller Teaming Options
Note:
19