Subscribe to Our Youtube Channel
Related Manuals for Intel Vectra VEi7
Summary of Contents for Intel Vectra VEi7
- Page 1 Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter Installation Guide...
- Page 2 Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
- Page 3 General information to read before installing General information to read before installing On all systems: efore installing LAN card, go into Bios setup and set PnP OS field to NO. • How to change LAN card configuration if needed (Advanced users only) This is a general advisory on how to forcibly modify resources for ISA and PCI network cards.
- Page 4 General information to read before installing 2 Press F2 to go to CMOS setup. 3 Set PNP OS to NO and reserve IRQ 5. 4 Save settings and boot to applicable OS.
- Page 5 • Microsoft Windows 95 SR2.5 media. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1020 DCE0 E400...
- Page 6 1 Installing the Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter Connecting to a Windows NT 3.51 Server 8 Windows 95SR2.5 will automatically recognize the Intel ethernet card as “PCI Ethernet Controller”. 9 Insert the “PRO/100B LAN Adapter Configuration and Driver Diskette” in the floppy drive and click on “Next”...
- Page 7 • Microsoft Windows 95 SR2.5 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1020 DCE0...
- Page 8 2 Installing the Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter Connecting to a Windows NT 4.0 Server 9 Insert the “PRO/100B LAN Adapter Configuration and Driver Diskette” in the floppy drive and click on “Next” from the Update Device Driver Wizard dialog box.
- Page 9 • Microsoft Windows 95 SR2.5 media. • Novell NetWare 3.12 Server system that supports IPX network protocol. • Novell Client for Windows 95 v2.5 installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1020 DCE0...
- Page 10 3 Installing the Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter Connecting to a Novell NetWare 3.12 Server 8 Click on “OK” when the system prompts for the computer and workgroup names. 9 Enter the Computer Name, Workgroup, and Computer Description in the appropriate spaces and click on “Close”...
- Page 11 • Microsoft Windows 95 SR2.5 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell Client for Windows 95 v2.5 installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1020 DCE0...
- Page 12 4 Installing the Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter Connecting to a Novell NetWare 4.11 Server 9 Insert the “PRO/100B LAN Adapter Configuration and Driver Diskette” in the floppy drive and click on “Next” from the Update Device Driver Wizard dialog box.
- Page 13 • Microsoft Windows NT 4.0 Service Pack 4 media. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1020 DCE0 E400...
- Page 14 26 Select “Yes” at the prompt to shut down and restart your computer for the new settings to take effect. 27 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 28 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed.
- Page 15 • Microsoft Windows NT 4.0 Service Pack 4 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1020 DCE0...
- Page 16 26 Select “Yes” at the prompt to shut down and restart your computer for the new settings to take effect. 27 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 28 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed.
- Page 17 • Microsoft Windows NT 4.0 Service Pack 4 media. • Novell NetWare 3.12 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1020 DCE0...
- Page 18 7 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Novell NetWare 3.12 Server 8 Log onto Windows NT4 Workstation with administrator privileges (Contact your network administrator if you do not have the required information). 9 Right-click on the “Network Neighborhood” icon and select “Properties”. 10 Click on “Yes”...
- Page 19 33 Click on the “Login” tab and specify your Name and Password to login. 34 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed.
- Page 20 • Microsoft Windows NT 4.0 Service Pack 4 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1020 DCE0...
- Page 21 8 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Novell NetWare 4.11 Server 8 Log onto Windows NT4 Workstation with administrator privileges (Contact your network administrator if you do not have the required information). 9 Right-click on the “Network Neighborhood” icon and select “Properties”. 10 Click on “Yes”...
- Page 22 33 Click on the “Login” tab and specify your Name and Password to login. 34 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed.
- Page 23 • Microsoft Windows NT 3.51 Service Pack 5 media. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1020 DCE0 E400...
- Page 24 9 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Windows NT 3.51 Server 9 Open the “Network” icon in the “Control Panel” program group. 10 Click on “YES” in the “Network Settings” dialog box to install Windows NT Networking.
- Page 25 • Microsoft Windows NT 3.51 Service Pack 5 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1020 DCE0...
- Page 26 10 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Windows NT 4.0 Server 9 Open the “Network” icon in the “Control Panel” program group. 10 Click on “YES” in the “Network Settings” dialog box to install Windows NT Networking.
- Page 27 • Microsoft Windows NT 3.51 Service Pack 5 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1020 DCE0...
- Page 28 11 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Novell NetWare 4.11 Server 9 Open the “Network” icon in the “Control Panel” program group. 10 Click on “YES” in the “Network Settings” dialog box to install Windows NT Networking.
- Page 29 • Microsoft Windows for Workgroups 3.11 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address DCE0 Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress PRO 100B PCI adapter card into a PCI slot.
- Page 30 12 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Windows NT 4.0 Server 10 Click on the “Install Microsoft Windows Network:” option, and click “OK”. 11 Click on the “Drivers” button from the “Network Setup” dialog box, and click on “Add Adapter”.
- Page 31 • Microsoft Windows for Workgroups 3.11 media. • Novell NetWare 4.11 Server system that supports IPX network protocols. • NetWare Client for DOS and MS Windows v1.21 installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1020 DCE0...
- Page 32 13 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Novell NetWare 4.11 Server 9 Select option 5 “Select the driver for your network board” and press “Enter”. 10 Select “OTHER DRIVERS”from the Network Board selection. 11 Insert the Intel EtherExpress Pro 100B driver disk into the floppy drive. 12 Type the path “A:\DOS”...
Need help?
Do you have a question about the Vectra VEi7 and is the answer not in the manual?
Questions and answers