Advertisement
Attach upper and lower elevator tubes (21) to top pole section (14) using bolts (20) and
9.
nuts (42) as shown. Attach pole cap (41) as shown.
.
10
• Fit rim (58) securely into bracket (1) as shown.
• Install reinforcement bracket (3) onto "T" bolt (2) as shown.
• Install spring (4) onto "T" bolt (2) as shown.
• Install special nut (35) and washer (22) onto "T" bolt (2).
Tighten nut (35) until
flush with end of "T" bolt
(2) as shown here.
P/N 21154401
01/04
WARNING!
TWO PEOPLE REQUIRED FOR
THIS PROCEDURE. FAILURE
TO FOLLOW THIS WARNING
COULD RESULT IN SERIOUS
INJURY AND/OR PROPERTY
DAMAGE.
NOTE:
21
42
21
58
35
22
4
3
16
41
21
2
1
21
20
20
Advertisement
