Select Water Level - Maytag PAVT-1 Use & Care Manual

Using the Controls – Two-Speed Models
STEP 1

Select Water Level

Determine the selected setting based on clothes load
size. Selection should provide sufficient water to permit
clothes to circulate freely during agitation.
It may become necessary, due to bulky fabrics, to
adjust the water level after agitation begins. To adjust
the water level, turn the control to reset and then back
to the desired setting.
WATER LEVEL SETTING
Mini
Medium
Large
Oversize
Note
• Items must circulate freely for best results.
5
LOAD SIZE
1/4 Full
1/4 – 1/2 Full
1/2 – 3/4 Full
3/4 – Full
STEP 2
Select Wash/Rinse Temperature
Your washer gives you a choice of hot, warm or cold
water for washing and cold or warm water for rinsing.
Use the chart below as a guide.
WASH/RINSE
TEMPS
White and heavily soiled, color-fast
Hot/Cold
items
Warm/Warm Delicate items
Moderately soiled, colored items;
Warm/Cold
most permanent press items
Brightly colored, lightly soiled
Cold/Cold
items; washable woolens
Note
• In wash water temperatures below 60
detergents do not dissolve well or clean well.
LOAD TYPE
°
F,