Saving Recordings On A Computer - Canon LEGRIA HF R206 Instruction Manual

NOTES
• In the following cases, you will not be able to copy recordings to the
memory card:
- If the double memory card slot cover is open.
- If the LOCK switch on memory card Y is set to prevent writing.
- If there is no memory card in memory card slot Y.
• Scenes that were edited using the supplied PIXELA's VideoBrowser*
and were then transferred to a memory card connected to the com-
puter cannot be copied to the memory card.
• If there is not enough space on memory card Y, scenes cannot be
copied. Photos will be copied until space on the memory card runs out.
* Not supplied with the

Saving Recordings on a Computer

Movies recorded with this camcorder are saved in the built-in memory
( / /
limited, make sure to save your recordings on a computer on a regular
basis. Carefully read the information in SDXC Memory Cards (0 33)
before performing the procedure using recordings made on an SDXC
memory card.
Saving Movies
With the supplied PIXELA's Transfer Utility or VideoBrowser* you can
save scenes to a computer running Windows operating system**. If
necessary, video files previously saved on a computer can be
transferred to a memory card. VideoBrowser also offers many options
for organizing your video library, editing video and more.
* Not supplied with the
** See the Software Guide (PDF file) of the supplied software for system requirements
and other information.
Installation
Install the supplied software before you connect the camcorder to the
computer for the first time. See the Installation Guide for PIXELA's soft-
ware.
Using the software
Refer to the Software Guide (PDF file) of the supplied software.
114
External Connections
.
only) or on the memory cards. Because space is
.