Saving Recordings On A Computer - Canon Legria HFM31 Instruction Manual

IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder's operating mode.
• When copying photos onto an Eye-Fi card, photos will be uploaded
automatically if you are within the range of a configured network. Always
verify that Eye-Fi cards have been approved in the country/region of
use. See also Using an Eye-Fi card (0 141).
NOTES
• In the following cases, you will not be able to copy recordings to the
memory card:
- If the memory card slot is open.
- If the LOCK switch on the memory card is set to prevent writing.
- If there is no memory card in the memory card slot.
•
Mixer 3 SE and were then written back to the camcorder cannot be
copied to the memory card.
• If there is not enough space on the memory card, as many photos as
possible will be copied before stopping the operation.

Saving Recordings on a Computer

Movies recorded with this camcorder are saved in the built-in memory
(
make sure to save your recordings on a computer on a regular basis.
Carefully read the information in SDXC Memory Cards (0 33)
before performing the procedure using recordings made on an SDXC
memory card.
Saving Movies
With the supplied software ImageMixer 3 SE you can save scenes to
your computer. If necessary, video files previously saved on a
computer can be restored back to the camcorder (
memory card. The software also offers many options for organizing
your video library, editing video and more.
Downloaded From VideoCamera-Manual.com Manuals
Scenes that were edited using the supplied software Image-
only) or on the memory card. Because space is limited,
External Connections
only) or a
123