Canon LEGRIA HF R206 Instruction Manual page 160

Too many photos. Disconnect the USB cable.
- Disconnect the USB cable. Try using a memory card reader or decrease the number of photos
on the memory card to fewer than 2,500 photos (Windows computers), or 1,000 photos
(Macintosh computers).
- If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and
restore the connection after a short while.
Total play time is too long
- The story cannot be converted when its total playback time exceeds 2 hours and 30 minutes.
Reduce the number of scenes to convert.
Unable to recognize the data
- You transferred data to the camcorder recorded in a different television system (NTSC). Play
back the recordings with the device originally used to record them.
Unable to recover data
- Could not recover a corrupted file. Save your recordings (0 114) and initialize the memory
using the [Complete Initialization] option (0 38).
Unsupported gallery data detected. Cannot record or edit. Delete gallery data?
- The gallery data on the selected memory is not supported by this camcorder. Playback is pos-
sible but you recording and editing is not. Touch [Yes] to erase the gallery data and enable
recording. If the gallery data is erased, the camcorder that recorded the movies will not be
able to play them back.
USB Connection Do not disconnect the power source. Do not disconnect the USB cable unless
you first use the computer to safely end the connection.
- When the camcorder is in
USB cable, the camcorder cannot be operated. Disconnecting the USB cable or power source
while this message appears may result in permanent loss of the recordings in the camcorder.
Use the computer's Safely Remove Hardware function to end the connection and disconnect
the USB cable before using the camcorder.
160
Additional Information
mode and is connected to the computer with the supplied