Canon LEGRIA HF R206 Instruction Manual page 140

• You can set Quick Start to [B Off], for example, if the camcorder is
set on a fixed position and you want to keep recording video with the
LCD panel closed in order to conserve the battery's power.
[Battery Info]:
Displays a screen where you can verify the battery charge
(as a percentage) and the remaining recording time (
back time (
[Control for HDMI]:
trol) function. When you connect the camcorder to an HDTV compatible
with HDMI-CEC using the supplied HDMI cable, you can control the cam-
corder's playback using the remote control of the TV.
• If set to [A On], when the camcorder is connected to a compatible
HDTV using the supplied HDMI cable, the video input on the TV will
automatically be set to the camcorder's video input. Then, you can use
the up/down/left/right buttons and the OK or SET button on the TV's
remote control to play back your recordings.
• Depending on the TV set, additional settings may be required on the TV
itself to activate the HDMI-CEC function. Refer to the TV's instruction
manual.
• Correct operation of the HDMI-CEC function cannot be guaranteed
even when connecting the camcorder to compatible TV sets. If you
cannot use the remote control of the TV, set [Control for HDMI] to
[B Off] and operate the camcorder directly.
• The remote control of the TV can only be used to play back movies or
photos (
TV while it is set to recording mode, depending on the TV used, turning
off the TV will automatically turn off the camcorder even if it is recording
at the time.
• We recommend not connecting more than 3 HDMI-CEC compatible
devices at a time.
[HDMI 1080p Output]:
connection to a television that supports 1080p output, the camcorder will
convert 1080i video and output it as 1080p.
[HDMI Status]:
output signal from the HDMI OUT terminal.
[Distance Units]:
during manual focus.
140
Additional Information
, mode).
Activates the HDMI-CEC (Consumer Electronics Con-
or mode only). If the camcorder is connected to the
When the camcorder is connected using an HDMI
Displays a screen where you can verify the standard of the
Selects the units to use for the focusing distance display
mode) or play-