Canon LEGRIA HF R206 Instruction Manual page 155

Cannot copy
- The total size of the scenes you selected to copy exceeds the available space in the memory.
Delete some recordings on the memory card (0 54, 100) or reduce the number of scenes to
copy.
- The memory already contains the maximum number of scenes (3,999 scenes). Delete some
scenes (0 54) to free some space.
Cannot divide the scene. Initialize only using the camcorder.
- The scene could not be divided because the camcorder's internal scene management data log
is full. Save your recordings (0 111) and initialize the memory (0 38). Write back the
backup files and try dividing the scene again.
Cannot edit
- Could not move the scene to another story. Delete some scenes from the story (0 84).
Cannot enter standby mode now
- The camcorder cannot enter standby mode if the remaining battery charge is too low. Charge
or replace the battery pack (0 19).
Cannot load canvas
- The canvas data in the memory is corrupted.
- Cannot load canvas data saved with another device. Use canvas data saved with this cam-
corder.
Cannot play back
- If a memory card was recorded on with another device and then the LOCK switch was set to
prevent writing, gallery information cannot be accessed correctly so playback is not possible
from the gallery screen. Play back scenes from the date index screen or change the position
of the LOCK switch on the memory card.
- There is a problem with the memory. If this message appears often without apparent reason,
contact a Canon Service Center.
/ /
- There is a problem with the built-in memory. Save your recordings (0 114) and initialize the
built-in memory using the [Complete Initialization] option (0 38). If the problem persists,
contact a Canon Service Center.
Cannot play back Check the memory card
- There is a problem with the memory card. Save your recordings (0 114) and initialize the
memory card using the [Complete Initialization] option (0 38). If the problem persists, use a
different memory card.
/ /
camcorder
- The camcorder's built-in memory was initialized using a computer. Initialize the built-in mem-
ory with this camcorder (0 38).
Cannot play back Cannot access the built-in memory
Cannot play the movies in the built-in memory Initialize only using the
Additional Information
155