Canon LEGRIA HF R206 Instruction Manual page 124

Connecting to the Computer and Uploading your Videos
If you are connecting the camcorder to the computer immediately after
the conversion described in the previous section, start this procedure
from step 3 below. Otherwise, start this procedure from the beginning.
1 Power the camcorder using the compact power adapter.
2 Connect the camcorder to the computer using the supplied USB
cable.
• Connection D. Refer to Connection Diagrams (
• /
uploading them.
3 Computer: Depending on the software you chose to install,
Transfer Utility or VideoBrowser will start up automatically.
• Transfer Utility: Click [Web Upload] to upload your SD movies to the
Web. For details about using the software, click [Help] to open the
Software Guide (PDF file).
• VideoBrowser: Click
files. For details about using the software, click
Software Guide (PDF file).
IMPORTANT
• While the camcorder is connected to the computer, do not open the
double memory card slot cover and do not remove the memory cards.
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the double memory card slot cover.
- Do not disconnect the USB cable.
- Do not disconnect the compact power adapter or turn off the
camcorder or the computer.
124
External Connections
Use PIXELA's software to convert your scenes before
in the menu panel to start transferring
0
107).
to open the