TYAN Thunder n4250QE-S4985G3NR-E Manual page 36

This BIOS feature allows you to manually force the BIOS to clear the previously
saved ESCD data and reconfigure the settings. All you need to do is enable this
BIOS feature and then reboot your computer. The new ESCD should resolve
the conflict and allow the operating system to load normally.
Please note that the BIOS will automatically reset it to the default setting of No
after reconfiguring the new ESCD. So, there is no need for you to manually
disable this feature after rebooting.
Yes / No
Intruder Support
This feature is used to set the chassis intruder function.
Enabled / Disabled
36