Audio Dubbing - Canon MD 235 Instruction Manual

5
Connected device: Begin
recording when the scene you
wish to copy appears. Stop
recording when copying is
complete.
6
This camcorder: Stop playback.
NOTES
• We recommend powering the
camcorder using the compact power
adapter.
• When recording to a VCR using an
analog connection –connection type
or ( 47)–, the quality of the edited
3
tape will be lower than the original.
• When recording to a digital video
recorder using the DV terminal
–connection type
- If the picture does not appear,
disconnect the DV cable and restore
the connection after a short while or
turn the camcorder off and then on
again.
- Proper operation cannot be
guaranteed for all digital devices
equipped with a DV terminal. If the
operation does not work, use the AV
terminal.
1
( 47)–:
2

Audio Dubbing

You can add sound to a recording using
the built-in or an external microphone.
(
POINTS TO CHECK
You can only dub audio on tapes recorded
in SP mode with [
( 39). This function is operated with the
wireless controller.
STOP
PAUSE
AUDIO DUB.
1
Locate the point where you want
to start dubbing audio.
Before locating the starting point,
you can also set the zero set
memory ( 33) at the point where
you want the audio dubbing to end.
The camcorder will automatically
stop audio dubbing at that point.
2
Start playback and immediately
PAUSE
press
3
Press AUDIO DUB.
"AUDIO DUB." and
4
PAUSE
Press
Speak into the microphone.
19)
12bit] audio
REW FF
PLAY
STOP
PAUSE
SLOW
ZERO SET
AUDIO DUB. TV SCREEN
MEMORY
.
.
appear.
to begin dubbing.
49