System Setup (Beep, Power Save, Etc.) - Canon MD 235 Instruction Manual

Digital video camcorder

Hide thumbs

Table Of Contents

Table of Contents

[BRIGHTNESS]: Adjust (

• Changing the brightness of the LCD display does not affect that of the viewfinder or the

recordings.

[TV SCREEN]: When set to [

on the screen of a connected TV or monitor.

When the date and time are displayed on the camcorder's screen they will also appear on

a connected TV regardless of the [TV SCREEN] setting. Turn off the date/time display with

the [DATA CODE] setting (

[MARKERS]: You can display a grid or a horizontal line at the center of the screen. Use the

markers as a reference to make sure your subject is framed correctly (vertically and/or

horizontally).

• Using the markers will not affect the recordings on the tape.

[DISPLAYS]: You can hide the on-screen displays to show only the playback picture on the

full screen.

• Tape operation displays appear for 2 seconds.

• Warning messages and the data code (if activated) will appear, even when set to

[

OFF<PLAYBK>].

• All on-screen displays will appear while the playback image is magnified or a digital

effect is activated.

[6SEC.DATE]: When you start playing back a tape or when the date of the recording

changes, the date and time will be displayed for 6 seconds.

[DEMO MODE]: The demonstration mode displays the camcorder's main features. It starts

automatically when the camcorder is powered with the power adapter if you leave it turned

on without loading a recording media for more than 5 minutes.

• To cancel the demo mode once it started, press any button, turn off the camcorder or

insert a videocassette.