Section 4 Setting Up - Netware - Axis 5600 User Manual

Section 4: Setting Up - NetWare
34

Section 4 Setting Up - NetWare

Installation
method
NDPS
Queue based
printing
This section describes how to continue the installation of the AXIS
5600 in the NetWare environment. Identify which transport protocol
you are running on your network and which installation method you
should use. Continue the installation by selecting the appropriate
installing instructions from the table below:
Transport
Action
protocol
TCP/IP See Setup using NDPS, on page 35
IPX/SPX Proceed with Installing the AXIS 5600 in NDPS environments, on page 36.
If you have performed the basic installations as described in Basic Setup
IPX/SPX with AXIS NetPilot, on page 21, the AXIS 5600 is already installed for
printing in the NetWare environment.
IPX/SPX
If you need a more advanced installation that is not covered by the AXIS
NetPilot Installation Wizard, continue with Advanced Installation using AXIS
Advanced
NetPilot, on page 38.
configuration
Pure IP
See Basic Queue-based printing (Pure IP), on page 41
If you intend to operate your AXIS 5600 in a multi-protocol, mixed
environment, you should also proceed to the other relevant sections in
this manual, namely:
Section 5 Setting Up - Windows, on page 44
Section 6 Setting Up - OS/2, on page 70
Section 7 Setting Up - Macintosh, on page 76
Section 8 Setting Up - UNIX, on page 82
AXIS 5600 User's Manual