Basic Setup With Axis Netpilot - Axis 5600 User Manual

AXIS 5600 User's Manual

Basic Setup with AXIS NetPilot

Starting the
Installation
Follow the instructions available on the AXIS Online CD to install the
AXIS NetPilot software on to your computer. AXIS NetPilot runs on
any of the Windows platforms; Windows 3.x, Windows 95, Windows
98, Windows NT, Windows 2000 or Windows for Workgroups.
Follow the instructions below to install the AXIS 5600 with AXIS
NetPilot:
1. Start AXIS NetPilot by double-clicking the NetPilot icon, which
is located in the folder where you installed AXIS NetPilot.
2. Locate the AXIS 5600 in the 'New Axis Units' folder. Select it and
click the Install button on the AXIS NetPilot toolbar. If your
network is large, it could take a few seconds before the print server
appears in the folder.
3. Choose the with Installation Wizard option and click OK. The
following screen appears:
The AXIS NetPilot Installation Wizard Main window
Section 3: Basic Installation
21