Table of Contents
Advertisement
Aligning the connector side with the slot and the left end of the board with the slot guide, and holding both ends
4.
of the board, push in the board.
NOTE: You need not align a half size board with the slot guide.
Fix the slot bracket with two mounting screws. Mounting screws must be installed in expansion slot (PCI) 1 and
5.
expansion slot (ISA) 1.
Insert the claw of the memory bracket into the guide holes on the system equipment, then fix it with mounting
6.
screws.
Pull the master board bracket to the back, then fix it with two mounting screws.
7.
Removing ISA boards
Remove ISA boards in the reverse procedure to their installation.
Hitachi PC VisionBase 8450H/R Server
5
6
4
Memory bracket
6
Master board bracket
Ch 3: Installing Optional Devices
5
Guide hole
95
Advertisement
Table of Contents
