Table of Contents
Advertisement
Ch 3: Installing Optional Devices
Remove the FDD cable and FDD power cable from the back of the floppy disk (standard).
2.
Remove two mounting screws from the front of the system equipment, then extract the device bracket.
3.
Remove two mounting screws from the extended storage bay to be used, then remove the bay cover.
4.
NOTE: Store the removed bay cover properly.
Fix the internal DAT changer onto the device bracket with four mounting screws (attached to the internal DAT
5.
changer).
74
FDD cable
FDD power cable
Device bracket
Bay cover
Hitachi PC VisionBase 8450H/R Server
Advertisement
Table of Contents
