Hitachi VisionBase 8450H Product Manual page 91

Table of Contents

Memory

There is one type of memory DIMM (128MB, 168-pin).

NOTE: You can check the total capacity of memory installable on the system equipment from the final memory

check values displayed by initial diagnosis at system startup.

Memory Capacity

512MB (standard)

1.0GB

1.5GB

2.0GB

Installing a Memory DIMM

Memory DIMMs must be added in units of four.

Memory DIMMs contains some parts that are susceptible to static electricity. Before handling memory

DIMMs, let static electricity be released from your body, for example, by touching a metallic door knob.

Make sure that all of memory slots 1 to 4 have a memory DIMM installed.

Make sure that there is no shift at the time of insertion. Any shift would cause some damage such as

the bending of pins.

Remove the two mounting screws from the brace at the back of the system equipment, then pull the master board

bracket to the front until it stops.

Remove the two mounting screws from the memory bracket, then pull and extract the memory bracket.

Hitachi PC VisionBase 8450H/R Server

1–4

5–8

Install

—

Install

Master board bracket

Ch 3: Installing Optional Devices

Memory Slot

9–12

—

Install

Memory bracket

13–16

—

Install

Table of Contents

Visionbase 8450r