Table of Contents
Advertisement
Installing the Display Panel
1. Replace the eight M2 x 3-mm screws that secure the display panel to the top cover.
2. Route the display-feed flex cable and antenna cables so that they rest in the notch located in the bottom edge of the top cover.
3. Replace the display bezel.
Removing the Display Hinges
CAUTION:
Before performing the following procedures, follow the safety instructions in the Product Information Guide.
CAUTION:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.
1. Follow the instructions in
Before Working Inside Your
2. Remove the display assembly (see
3. Remove the display bezel (see
4. Remove the display Panel (see
5. Remove the M2.5 x 5-mm screw from the right display hinge.
6. Lift the right display hinge off the two alignment pins and out of the top cover.
7. Repeat
step 5
and
step 6
for the left display hinge.
1
M2.5 x 5-mm screw
2
4
top cover
Back to Contents Page
Computer.
Display
Assembly).
Removing the Display
Bezel).
Removing the Display
Panel).
right display hinge
3
alignment pins (2)
Advertisement
Table of Contents
