Table of Contents
Advertisement
1 screw covers/display bumpers (6)
4 top cover
Removing the Display Panel
CAUTION:
Before performing the following procedures, follow the safety instructions in the Product Information Guide.
CAUTION:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.
1. Follow the instructions in
Before Working Inside Your
2. Remove the display assembly (see
3. Remove the display bezel (see
4. Remove the four M2 x 3-mm screws from each side of the display panel.
5. Lift the display panel out of the top cover.
1
display panel
4
notches for cable routing
2 M2.5 x 5-mm screws (6)
Computer.
Display
Assembly).
Removing the Display
Bezel).
2
top cover
3
M2 x 3-mm screws (4)
3
display bezel
Advertisement
Table of Contents
