Remote Cisco 765 Command Summary - Cisco 700 Series Configuration Manual

Remote Cisco 765 Command Summary

Following is the command summary to configure the remote Cisco 765 series router for IP
static and IPX static routing with PPP using CHAP and MLP:
set switch 5ess
set 1 dir directory_number
set 2 dir directory_number
set system 765
set multidestination on
set ppp authentication incoming chap
set ppp authentication outgoing chap
set ppp secret client
set ppp secret host
cd lan
set ipx network 1478
set ipx framing 802.2
set ipx routing on
set ipx rip update periodic
set ip address 192.168.147.9
set ip netmask 255.255.255.248
set ip routing on
set ip rip update periodic
set user 4500
set ipx network 32125
set ipx routing on
set ipx route destination 3039e670 gateway 32125:0c08af65
set ipx service name CORP_FS1 type 4 address 3039e670:01:0451
set ipx spoof 10
set ipx rip update off
set ipx framing none
set ip routing on
set ip route destination 0.0.0.0 gateway 172.16.125.1 propagate on
set ip address 172.16.125.7
set ip netmask 255.255.255.0
set ip framing none
set number 5558011
set bridging off
set ip rip update off
set timeout 360
set active
reboot
Remote Cisco 765 Command Summary
Using CHAP 4-11