Self-Diagnosis Function; Specifications - IBM P72 Operating Instructions Manual

Self-diagnosis Function

This monitor is equipped with a self-diagnosis function. If
there is a problem with your monitor or computer, the
screen will go blank and the u indicator will either light up
green or flash orange.
If the u u u u u indicator is green
1
Disconnect the video input cable or turn off the
connected computer.
2
Press and hold the >/ button for 2 seconds.
If all four color bars appear (white, red, green, blue), the
monitor is working properly. Reconnect the video input
cable and check the condition of your computer.
If the color bars do not appear, there is a potential
monitor failure. Inform your service representative of
the monitor's condition.
If the u u u u u indicator is flashing orange
Press the u u u u u button to turn the monitor off and on.
If the u indicator lights up green, the monitor is
working properly.
If the u indicator is still flashing, there is a potential
monitor failure. Inform your service representative of
the monitor's condition. Be sure to note the model name
and serial number of your monitor. Also note the make
and model of your computer and video board.
u indicator
Getting Started
Additional Information

Specifications

Picture tube 0.25 mm aperture grille pitch
17 inches measured diagonally
90-degree deflection
Viewable image size Approx. 327 242 mm (w/h)
7
(12
16.0" viewing image
Resolution Horizontal: Max. 1280 dots
Vertical: Max. 1024 lines
Standard image area Approx. 312 234 mm (w/h)
3
(12
Deflection frequency Horizontal: 30 to 85 kHz
Vertical: 50 to 150 Hz
256 Total Line
AC input voltage/current
100 to 240 V, 50 – 60 Hz, 1.9 – 1.1 A
Power consumption Max. 120 W
Dimensions 408 441 434 mm (w/h/d)
1
(16
Mass Approx. 19.2 kg (41 lb 14 oz)
Design and specifications are subject to change without
notice.
5
/ 9 / inches)
8 8
1
/ 9 / inches)
8 4
1700
3 1
/ 17 / 17 / inches)
8 8 8
17
EN
F
ES
C