Furuno FM-4000 Owner's Manual page 54

3. Press [ ENT ] key to show the Position Send Di-
rectory. This directory uses the Individual Di-
rectory information.
4. Turn the CHANNEL selector knob to select a
name in the directory, then press the [ ENT ] key.
5. Press the [ ENT ] key again to send your posi-
tion to the selected vessel.
6. Press the [ CLR ] key twice to return to the "Ra-
dio Setup" menu, then press the [ CLR ] key
dio Setup dio Setup
dio Setup dio Setup
again to return to radio operation.
Manual Calling
You may enter an MMSI number manually to send your position to that vessel
without entering it into the Setting up the Individual / Position Call Directory.
1. Press the [ CALL ( MENU )] key to show the "DSC
Call Menu Call Menu
Call Menu." Call Menu Call Menu
2. Turn the CHANNEL selector knob to select
"Pos Report
Pos Report Pos Report
Pos Report Pos Report."
3. Press [ ENT ] key to show the Position Send
Directory. This directory uses the Individual
Directory information.
4. Turn the CHANNEL selector knob to select
Manual," then press the [ ENT ] key.
"Manual
Manual Manual
Manual
5. Enter the MMSI number (nine digits: first digit
permanently set to "0") which you want to con-
tact, then press the [ ENT ] key.
6. If you enter a wrong number in the MMSI num-
ber, press the [ H/L ] key until the wrong number is
selected, then enter the correct number.
7. When you have finished entering the MMSI num-
ber, press and hold the [ ENT ] key.
8. Press the [ ENT ] key to send your position to the
selected vessel.
Page 54
Ra- Ra- Ra-
Ra-
DSC DSC DSC DSC
FM-4000